CS141 network integration

All models in the CS141 family are configured exclusively via the adapter's specially developed web interface. To facilitate initial configuration or quick on-site intervention, the CS141 family's web manager is hardware-preset to the default IP address 10.10.10.10.

The following table shows the options for regular operating modes in standard operation:

Sliding switch to center position / DIP switch 1+2 OFF: After booting, the CS141 will run in configuration mode. Hard-coded default IP address 10.10.10.10 is active.
Sliding switch to right position/ DIP 1 OFF + DIP 2 ON: After booting DHCP mode is active and IP address will be assigned automatically. To identify assigned IP address check MAC address of CS 141.
Sliding switch to left position / DIP 1 to ON + DIP 2 OFF: After booting operating mode is active, manually configured network settings will take effect.
Both DIP switches ON / (CS141Mini): This funktion starts the rescue system on the CS141Mini

Note: Check IP address settings! 

Manual IP address assignment: If you have configured your laptop to match the CS141's default address, the network settings change on the CS141 will be applied immediately. If this IP address is outside the currently configured IP address range, the CS141's web interface will not be displayed. 

DHCP mode: A DHCP server must be available for this mode, as otherwise no IP address can be assigned."